Guide

OI-weighted funding rate: how the average is built

OI-weighted funding averages each venue's funding rate by its open interest: what the average open position pays. The formula, a worked example and limits.

Blockmetric ResearchUpdated 5 min read

On this page
  1. Why a plain average misleads
  2. The formula
  3. Step 1: put every rate in the same unit
  4. Step 2: weight by open interest
  5. From one coin to the whole market
  6. OI-weighted vs volume-weighted funding
  7. What the number tells you, and what it does not
  8. Where to read it on Blockmetric
  9. Limits of the data
  10. Common questions

An OI-weighted funding rate is the average funding rate of one coin across several venues, where each venue counts in proportion to its open interest. A venue that holds most of the open positions moves the average most; a small venue barely moves it. The result describes what the average open position of that coin pays or receives in funding.

This guide shows why a plain average misleads, how the weighted average is built step by step, how a market-wide figure is made from it, and what the number cannot tell you.

Why a plain average misleads

Every perpetual futures venue sets its own funding rate from its own premium. The same coin can carry different rates on different venues at the same time. To get one number for the coin, the obvious approach is to add the rates and divide by the number of venues.

That plain average treats every venue as equally important. If one venue holds a large share of the open interest and a small venue shows an extreme rate, the plain average is pulled towards the small venue, even though few positions pay that rate. Weighting by open interest fixes this: funding is paid on open positions, so the size of the open positions is the natural weight.

The formula

The OI-weighted funding rate of a coin is:

OI-weighted APR = Σ (APR of venue × open interest of venue) ÷ Σ open interest

Each term is computed only for venues that report both a funding rate and an open interest for that coin. The sum runs over those venues, and the open interest is measured in USD so venues are comparable. Our funding rate metric page lists the same formula with its method.

Step 1: put every rate in the same unit

Venues settle funding on different schedules. Hyperliquid pays funding every hour,1 while many other venues settle every few hours. A rate for an eight-hour period and a rate for one hour cannot be averaged directly.

The fix is to convert every rate to the same basis first:

  • Hourly rate = the venue's rate divided by its funding interval in hours.
  • APR = the hourly rate × 24 × 365.

Only after this step does a weighted average make sense. How funding rates are calculated explains where each venue's rate comes from, and Funding rates explained covers hourly against eight-hour funding in detail.

Step 2: weight by open interest

With the rates in one unit, multiply each by the venue's open interest in USD, add the products, and divide by the total open interest.

A negative rate enters the sum with its sign, so a large venue with negative funding can pull the average below zero even when smaller venues are positive. What a negative rate means for longs and shorts is covered in Negative funding rate.

From one coin to the whole market

The same idea extends to a market-wide figure. Take the OI-weighted rate of each coin and weight it again by the coin's total open interest. The result equals weighting every venue and coin pair by its open interest directly.

Such a figure is dominated by the coins with the most open interest. That is intended: it describes what the average dollar of open interest in the market pays. It also means a sharp move in the funding of a small coin hardly shows up, so the per-coin numbers are worth reading next to it.

OI-weighted vs volume-weighted funding

Some figures weight funding by trading volume instead. The two answer different questions:

  • Volume weighting follows where trading happens. A venue with a lot of short-term trading but few positions held over a funding time gets a large weight.
  • OI weighting follows where positions are held. Funding is charged on positions open at the funding time, not on trades, so open interest matches what funding is actually paid on.

The guide Open interest vs volume explains why the two can diverge so much on the same venue.

What the number tells you, and what it does not

It tells you the direction and rough size of what the average open position pays. A clearly positive OI-weighted rate means that across venues, the bulk of open longs are paying shorts. Read over time, it shows whether that pressure is building or fading across the market rather than on one venue.

It does not tell you:

  • Where the differences are. An average hides the gaps between venues. The funding spread, highest minus lowest rate across venues, shows those gaps, and our arbitrage view on Funding lists them.
  • What will be paid next. The figure uses current rates. A venue's next rate can still change until its funding time, which the predicted funding view follows.
  • The positioning itself. Funding reflects the premium, not the number of longs and shorts. Open interest and long/short covers those.

Where to read it on Blockmetric

On Funding, the board shows an OI-weighted column for every coin next to each venue's rate, and the header shows the market-wide OI-weighted funding over the largest coins by open interest. Both use the venues currently enabled on the site; a venue that is switched off drops out of every average, so the figure is only as broad as its inputs.

Over the API, the same per-coin rates and open interest come from the /funding board endpoint, which Funding rate and open interest API walks through.

Limits of the data

  • Venue coverage. The average covers the venues we collect, not every venue that lists the coin.
  • Snapshot timing. Rates and open interest are read at slightly different moments on each venue, so the figure is a few minutes old at most.
  • Published rates. Each venue's rate is as published. Differences in how venues compute their premium are carried into the average unchanged.

Common questions

Is OI-weighted funding the same as the funding rate on one exchange? No. It is an average across venues. On a venue that holds most of the open interest the two are close; on a small venue they can be far apart.

Why convert to APR first? Venues settle at different intervals. Converting every rate to an hourly or annualised basis makes the numbers comparable before they are averaged.

Can the OI-weighted rate be negative? Yes. If venues with large open interest have negative funding, the weighted average can be negative even when smaller venues are positive.

Sources

  1. Hyperliquid Docs, "Funding" (accessed 2026-11-11)Back to text

How we collect and check the data: Data & methodology.

See today’s numbersThe live pages update continuously.

See OI-weighted funding
LiveHyperliquid markets 17sOperationalHyperliquid positions & whales 22sOperationalLiquidation heatmap & levels 20sOperationalLighter markets & liquidations 25sOperationalLighter positions & heatmap 15sOperationalLighter RH positions & heatmap 22sOperationalBinance markets 1mOperationalBybit markets 19sOperationalBinance liquidations 23sOperationalBybit liquidations 23sOperationaldYdX positions & heatmap 18sOperationalGMX positions & heatmap 22sOperationalLong/short & open interest history 26sOperationalOrder books & trade flow 20sOperationalOn-chain transfers 16sOperationalSecurity monitor 16sOperationalBlockmetric Sentiment 10mOperationalAgency releases 33sOperationalAlert delivery 17sOperationalDataset files 1mOperational16:08:18 UTCData: Blockmetric Research