Guide

Hyperliquid order types: market, limit, stop, TWAP, scale and more

Every Hyperliquid order type in one place: market, limit, stop and take orders, TP/SL, TWAP, scale, trailing stop, chase, and the time-in-force options.

Blockmetric ResearchUpdated 5 min read

On this page
  1. Where the orders go
  2. Market and limit orders
  3. Time in force and other options
  4. Stop and take orders
  5. Take profit and stop loss (TP/SL)
  6. Trailing stop
  7. TWAP
  8. Scale and chase
  9. Orders in market data
  10. Limits of this guide
  11. Common questions

Hyperliquid offers the order types of a centralised exchange on a fully on-chain order book: market and limit orders, stop and take orders that wait for a trigger price, take-profit and stop-loss orders attached to a position, and algorithmic orders such as TWAP and scale orders. Each order can carry options that decide how long it rests and whether it may open a new position.

This guide explains each type as Hyperliquid documents it, what it is used for and the trade-off it carries. It describes how the orders work; it does not suggest which one to use.

Where the orders go

Every order on Hyperliquid lands in HyperCore, which keeps one order book per asset as part of the chain's state.1 Orders are matched in price-time priority, and prices and sizes must sit on the asset's tick and lot grid.1 Because every order, cancel, trade and liquidation is on-chain,2 the open orders of a wallet are public, which is how trackers can see the stop orders of large wallets.

Market and limit orders

  • Market order. Executes immediately at the current market price.3 It takes liquidity from the book, level by level, so a large market order fills at a worse average price than the best quote. Order book depth and slippage shows that arithmetic.
  • Limit order. Executes at the chosen limit price or better.3 If no one trades at that price, it rests on the book and may never fill.

The basic trade-off runs through every other type: a market order is certain to fill but not at a known price; a limit order fills at a known price but is not certain to fill.

Time in force and other options

Options decide how an order behaves once it reaches the book:3

  • Good til cancel (GTC). Rests on the book until it fills or is cancelled.
  • Post only (ALO). Is only added to the book as a resting order and never executes immediately.
  • Immediate or cancel (IOC). Whatever cannot be filled immediately is cancelled.
  • Reduce only. Can only reduce an existing position, never open one in the opposite direction.

Reduce only matters for exits. A closing order without it can, if the position was already closed by something else, open a new position the other way.

Stop and take orders

Stop and take orders wait for a trigger price and then send a market or limit order.3

TypeSendsTrigger for a buy orderTrigger for a sell order
Stop marketMarket orderAbove the mid priceBelow the mid price
Stop limitLimit orderPrice reaches the triggerPrice reaches the trigger
Take marketMarket orderBelow the mid priceAbove the mid price
Take limitLimit orderPrice reaches the triggerPrice reaches the trigger

The table follows Hyperliquid's documentation, which states the trigger conditions in terms of long and short orders.3 A stop order triggers when the price moves against the side that placed it or breaks through a level; a take order triggers when the price moves in its favour.

Take profit and stop loss (TP/SL)

TP/SL orders close a position at a chosen profit or loss. On Hyperliquid they trigger on the mark price, not the last traded price.4 They are market orders by default, with a slippage tolerance of 10% for market TP/SL; setting a limit price caps the fill price but can leave the order unfilled if the market gaps past it.4

There are two ways to attach them:4

  • Position TP/SL. Placed from the position and covering the whole position by default, resizing as it changes. With a fixed size set, it stays at that size.
  • Order TP/SL. Linked to a parent order with the same size. They are placed once the parent fills completely; cancelling a parent that has not fully filled cancels them too.

How a stop loss relates to the liquidation price of the same position is explained in Stop loss vs liquidation price.

Trailing stop

A trailing stop is a market order that triggers when the mark price retraces from its best level by a chosen distance or percentage.3 For a stop that closes a long, the reference is the highest mark price reached since activation; for one that closes a short, the lowest.3 Hyperliquid documents it for perpetual markets only.3

TWAP

A TWAP (time-weighted average price) order splits a large order into smaller suborders sent at regular intervals over a chosen running time.3 The documented rules:3

  • Running time from 5 minutes to 7 days, with a minimum total size of $100.3
  • Suborders at fixed intervals, never less than 30 seconds apart; the target filled so far is the elapsed share of the running time multiplied by the total size.3
  • Slippage cap of 3% per suborder.3
  • Catch-up. If suborders do not fill, later ones can grow up to three times the normal suborder size, and the order may still end without being fully filled.3
  • Randomise varies each suborder's size by up to 20% either way.3
  • Trigger and price limit. A TWAP can wait for a trigger price, and a maximum (buys) or minimum (sells) price stops suborders from filling beyond it.3

The point of a TWAP is to trade size without walking deep into the book at once. The cost is time: the price can move during the running time.

Scale and chase

  • Scale order. Places several limit orders across a chosen price range at once.3 It spreads one intended size over many levels instead of one.
  • Chase order. A post-only limit order that re-prices itself to track the best bid or ask until it fills or is stopped.3 Hyperliquid notes that chase orders run in the browser tab where they were created and that up to five can be active at once.3 A closed tab therefore stops the re-pricing.

Orders in market data

Because order books and open orders are public on Hyperliquid, orders leave traces in market data:

  • Resting limit orders make up the order book, and large ones show as walls on the order book heatmap.
  • Triggered stops and liquidations send market orders in the direction of the move, which can chain into a liquidation cascade.
  • Open trigger orders of the largest tracked wallets are mapped by price on the whale stops metric page and listed per wallet on Whales.
  • Executed trades feed taker flow, read as CVD.

Limits of this guide

  • The venue changes. Order types, limits and defaults are Hyperliquid's to change. The documentation linked below is the reference, and this guide reflects it on the date in the footnotes.
  • Interface features. Some types, such as chase orders, are features of the trading interface rather than of the order book itself, and other front ends may not offer them.
  • No recommendation. Which type fits depends on size, urgency and risk, and this guide makes no suggestion either way.

Common questions

Do Hyperliquid stop orders use the mark price? TP/SL orders and trailing stops trigger on the mark price.43 The stop and take order definitions refer to the mid price for where a trigger may be placed.3

What is the difference between a stop market and a stop limit order? Both wait for a trigger. A stop market then sends a market order, which fills but at an uncertain price; a stop limit sends a limit order, which caps the price but may not fill.

Can anyone see my open orders? Open orders on Hyperliquid are part of the public chain state and can be read per address.

Sources

  1. Hyperliquid Docs, "HyperCore: Order book" (accessed 2026-11-11)Back to text
  2. Hyperliquid Docs, "About Hyperliquid" (accessed 2026-11-11)Back to text
  3. Hyperliquid Docs, "Order types" (accessed 2026-11-11)Back to text
  4. Hyperliquid Docs, "Take profit and stop loss orders (TP/SL)" (accessed 2026-11-11)Back to text

How we collect and check the data: Data & methodology.

See today’s numbersThe live pages update continuously.

See Hyperliquid markets
LiveHyperliquid markets 8sOperationalHyperliquid positions & whales 6sOperationalLiquidation heatmap & levels 6sOperationalLighter markets & liquidations 13sOperationalLighter positions & heatmap 10sOperationalLighter RH positions & heatmap 5sOperationalBinance markets 23sOperationalBybit markets 54sOperationalBinance liquidations 14sOperationalBybit liquidations 14sOperationaldYdX positions & heatmap 13sOperationalGMX positions & heatmap 10sOperationalLong/short & open interest history 15sOperationalOrder books & trade flow 15sOperationalOn-chain transfers 6sOperationalSecurity monitor 55sOperationalBlockmetric Sentiment 1mOperationalAgency releases 1mOperationalAlert delivery 4sOperationalDataset files 22mOperational16:30:06 UTCData: Blockmetric Research